Basic inspection

DIAGNOSIS AND REPAIR WORKFLOW Work Flow OVERALL SEQUENCE DETAILED FLOW 1.OBTAIN INFORMATION ABOUT SYMPTOM Interview the customer to obtain as much information as possible about the conditions ...

Power supply and ground circuit

Combination meter COMBINATION METER : Diagnosis Procedure 1.CHECK FUSE Check for blown fuses. Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate cause of ...

Other materials:

C1121, C1123, C1125, C1127 ABS out valve system
DTC Logic DTC DETECTION LOGIC wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.CHECK DTC DETECTION With CONSULT-III 1. Turn the ignition switch OFF to ON. 2. Perform self-diagnosis for “ABS”. Is DTC “C1121”, “C1123”, “C1125” or “C1127” detected? YES > ...

Fuel level sensor unit, fuel filter and fuel pump assembly
Exploded View 1. Fuel tank 2. Rock ring 3. Fuel level sensor unit, fuel filter and fuel pump assembly 4. O-ring : Vehicle front : Always replace after every disassembly. : N·m (kg-m, ft-lb) 1. Fuel filter and fuel pump assembly 2. Fuel gauge Removal and Installation WARNING: ...

Differential side oil seal
Exploded View 1. Transaxle assembly 2. Differential side oil seal (left side) 3. Differential side oil seal (right side) : Always replace after every disassembly. : Genuine NISSAN CVT Fluid NS-2 Removal and Installation REMOVAL NOTE: Cap or plug openings to prevent fluid from spilling ...