Configuration (bcm)

Description Vehicle specification needs to be written with CONSULT-III because it is not written after replacing BCM. Configuration has three functions as follows. NOTE: Manual setting item: I ...

U1000 can comm

Description CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-vehicle multiplex communication line with high data communication speed and excelle ...

Other materials:

Nats antenna AMP
Removal and Installation REMOVAL 1. Remove the cluster lid A. Refer to IP-13, "Removal and Installation". 2. Remove the NATS antenna amp. 1. Disengage the NATS antenna amp. (1) fixing pawls using minus driver etc. 2. Pull NATS antenna amp. to remove it from push-button ignition sw ...

Precaution for Brake Control system
• Always perform a pre-driving check to drive the vehicle.• Always perform a pre-driving check to drive the vehicle. • Always check speed and safety while driving the vehicle. • Always check speed and safety while driving the vehicle. • To operate CONSULT-III while driving, more than one pers ...

Door does not lock/unlock with intelligent key
Diagnosis Procedure 1.CHECK DTC WITH BCM AND TCM Check that DTC is not detected with BCM and TCM. Is the inspection result normal? YES >> GO TO 2. NO-1 >> Refer to BCS-67, "DTC Index". (BCM) NO-2 >> Refer to TM-171, "DTC Index" (RE0F10B models) or TM-3 ...