Nissan Juke Service and Repair Manual : DTC/circuit diagnosis
- U1000 can comm
- U1010 control unit (can)
- U0415 vehicle speed
- B2562 low voltage
- Power supply and ground circuit
- Combination switch output circuit
- Combination switch input circuit
Basic inspection
Inspection and adjustment Additional service when replacing control unit (BCM) ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Description BEFORE REPLACEMENT When replacing BCM, save or pri ...U1000 can comm
Description CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-vehicle multiplex communication line with high data communication speed and excelle ...Other materials:
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
driver and front passenger for certain
types of collision. Information necessary to service the system safely is
include ...
Throttle valve closed position
learning
Description
Throttle Valve Closed Position Learning is a function of ECM to learn the
fully closed position of the throttle
valve by monitoring the throttle position sensor output signal. It must be
performed each time the harness connector
of the electric throttle control actuator or ECM is ...
Seat belts with pretensioners (front seats)
WARNING
• The pretensioners cannot be reused after activation. They must be replaced
together with the retractor and buckle as a unit.
• If the vehicle becomes involved in a collision but a pretensioner is not activated,
be sure to have the pretensioner system checked and, if necessary, replac ...