Basic inspection

DIAGNOSIS AND REPAIR WORK FLOW Work Flow DETAILED FLOW 1.OBTAIN INFORMATION ABOUT SYMPTOM Interview the customer to obtain as much malfunction information (conditions and environment when the ma ...

Door mirror remote control switch (mirror switch/ changeover switch)

Component Inspection 1.CHECK MIRROR SWITCH & CHANGEOVER SWITCH 1. Turn ignition switch OFF. 2. Disconnect door mirror remote control switch connector. 3. Check door mirror remote control switc ...

Other materials:

P0132 A/F sensor 1
DTC Logic DTC DETECTION LOGIC To judge the malfunction, the diagnosis checks that the A/F signal computed by ECM from the A/F sensor 1 signal is not inordinately high. DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always turn ig ...

Blower fan on signal
Component Function Check 1.CHECK BLOWER FAN ON SIGNAL With CONSULT-III 1. Turn ignition switch ON. 2. Select “AIR CONDITIONER” of “BCM” using CONSULT-III. 3. Select “FAN ON SIG” in “DATA MONITOR” mode. 4. Check blower fan ON signal when the fan control dial is operated. Is the inspection re ...

Oil pump fitting bolt
Description Replace the oil pump fitting bolt and the O-ring if oil leakage or exudes from the oil pump fitting bol Exploded View 1. Oil pump fitting bolt 2. O-ring 3. Transaxle assembly : Always replace after every disassembly. : N·m (kg-m, ft-lb) : Genuine NISSAN CVT Fluid NS-2 Re ...