Nissan Juke Service and Repair Manual : DTC/circuit diagnosis
- U1000 can comm circuit
- U1010 control unit (can)
- B2578, B2579 In-vehicle sensor
- B257B, B257C ambient sensor
- B2581, B2582 intake sensor
- B2630, B2631 sunload sensor
- B2632, B2633 air mix door motor PBR
- B2636, B2637, B2638, B2639, B2654, B2655 mode door motor
- B263D, B263E, B263F intake door motor
- B27B0 A/C auto AMP.
- Power supply and ground circuit
- Door motor
- A/C on signal
- Blower fan on signal
- Blower motor
- Magnet clutch
- PTC heater
System setting
Temperature Setting Trimmer DESCRIPTION If the temperature felt by the customer is different from the air flow temperature controlled by the temperature setting, the A/C auto amp. control tempera ...U1000 can comm circuit
Description CAN (Controller Area Network) is a serial communication system for real time application. It is an on-vehicle multiplex communication system with high data communication speed and exce ...Other materials:
Speedometer and odometer
Speedometer
The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers
per hour (km/h).
Odometer/twin trip odometer
The odometer 1 /twin trip odometer 2 are displayed when the ignition switch is
in the ON position.
The odometer records the total distance the vehicle h ...
Power supply and ground circuit
Power window main switch
POWER WINDOW MAIN SWITCH : Diagnosis Procedure
1.CHECK POWER WINDOW MAIN SWITCH POWER SUPPLY
1. Turn ignition OFF.
2. Disconnect power window main switch connector.
3. Check voltage between power window main switch harness connector and ground.
(): RHD models
Is the ...
Removal and installation
HORN
Exploded View
WITHOUT VEHICLE SECURITY SYSTEM
1. Horn high
2. Horn low
3. Horn bracket
WITH VEHICLE SECURITY SYSTEM
1. Horn low
2. Horn bracket
Removal and Installation
REMOVAL
Without Vehicle Security System
1. Remove the front center grille and front side grille (LH/RH). Re ...