Nissan Juke Owners Manual : Drive mode
When the Drive mode select button is pressed, the display and buttons appear as shown.
1. Drive mode select button
2. SETUP button
3. Drive mode NORMAL button
4. Drive mode SPORT button
5. Drive mode ECO button
6. Display screen
7. Drive information button
8. ECO information button
9. ENTER button/Selection dial
Integrated control system (if so equipped)
The Integrated Control System is located below the audio system or navigation system (if so equipped). Two Integrated Control System modes can be selected: Drive mode and Climate Control mode. De ...Setup function
While in the Drive mode, the following items can be set up by pressing the SETUP button. • Display Brightness • Button Brightness • Clock Time Setting • Select Language • Select Units •& ...Other materials:
ASCD main switch
Component Function Check
1.CHECK ASCD MAIN SWITCH FUNCTION
1. Turn ignition switch ON.
2. Check the voltage between ECM harness connector terminals under the following
conditions.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Go to EC-1009, "Diagnosis Proced ...
Component parts
Starting system (with intelligent key) : Component Parts Location
1. IPDM E/R
Refer to PCS-5, "Component Parts
Location".
2. Transmission range switch (CVT
models)
Refer to TM-131, "CVT CONTROL
SYSTEM : Component Parts Location"
(MR16DDT), TM-314, "CVT
CONTROL SYS ...
Seat belt buckle switch signal circuit (passenger side)
Diagnosis Procedure
1.CHECK SEAT BELT BUCKLE SWITCH (PASSENGER SIDE) CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect combination meter connector and seat belt buckle switch (passenger
side) connector.
3. Check continuity between combination meter harness connector and seat belt
buckle swi ...