Nissan Juke Service and Repair Manual : Door & Lock type 2

Intelligent key battery
Removal and Installation 1. Release the lock knob at the back of the Intelligent Key and remove the mechanical key. 2. Insert a flat-blade screwdriver (A) wrapped with a cloth into the slit of th ...

How to use this manual
APPLICATION NOTICE Information Check the vehicle type to use the service information in this section. ...

Other materials:

Rear seats
Folding Before folding the rear seats: Secure the seat belts on the seat belt hooks on the side wall. (See “Seat belt hooks” .) To fold the seatback, pull the adjusting knob1 . To return the seatback to the seating position, lift up each seatback and push it to the upright position until it ...

Water pump
Exploded View 1. Gasket 2. Water pump : N·m (kg-m, ft-lb) : Always replace after every disassembly. Removal and Installation REMOVAL 1. Drain engine coolant from radiator. Refer to CO-11, "Draining". CAUTION: • Perform this step when the engine is cold. • Never spill engin ...

C1120, C1122, C1124, C1126 ABS in valve system
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.CHECK DTC DETECTION With CONSULT ...