Nissan Juke Service and Repair Manual : Diagnosis system (PTC heater control unit)
CONSULT-III Function
CONSULT-III performs the following functions via CAN communication with PTC heater control unit.
ECU IDENTIFICATION
Part number of PTC heater control unit can be checked.
SELF-DIAGNOSTIC RESULT
Diagnosis result that is judged by PTC heater control unit. can be checked. Refer to HAC-267, "DTC Index".
DATA MONITOR
Input/output signal of PTC heater control unit can be checked.
Display item list
Operation
Switch Name and Function A/C CONTROLLER (A/C CONTROL) 1. MODE dial 2. Fan control dial 3. A/C switch 4. Temperature control dial 5. Intake lever ...Diagnosis system (BCM) (with intelligent key system)
Description Air conditioning system performs self-diagnosis, operation check, function diagnosis, and various settings using diagnosis function of each control unit. Common item : consult-III F ...Other materials:
Security indicator lamp does not turn on or blink
Description
Security indicator lamp does not blink when ignition switch is in a position
other than ON.
NOTE:
• Before performing the diagnosis, check “Work Flow”. Refer to SEC-47, "Work
Flow".
• Check that vehicle is under the condition shown in “CONDITIONS OF VEHICLE
(OPERATI ...
System
ENGINE CONTROL SYSTEM : System Diagram
1. Priming pump
2. Fuel filter
3. High pressure supply pump
4. High pressure supply pump (internal
transfer pump)
5. High pressure supply pump (volumetric
control valve)
6. High pressure supply pump (high
pressure pump)
7. High pressure supply pum ...
Fuel injector and fuel tube
Exploded View
1. Holder
2. Seal ring (white)
3. Backup ring
4. O-ring (blue)
5. Fuel injector
6. Stud bolt
7. Fuel tube assembly
8. Fuel tube insulator
9. Fuel tube protector
10. Fuel pressure sensor
11. O-ring
12. Fuel tube adaptor
13. Backup ring (white)
14. Backup ring ( ...