Nissan Juke Service and Repair Manual : Diagnosis system (BCM) (without intelligent key system)

Nissan Juke Service and Repair Manual / Interior Lighting System / System description / Diagnosis system (BCM) (without intelligent key system)

Common item

COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM)

APPLICATION ITEM

CONSULT-III performs the following functions via CAN communication with BCM.

SYSTEM APPLICATION


SYSTEM APPLICATION

BCM can perform the following functions for each system.

NOTE

:
It can perform the diagnosis modes except the following for all sub system selection items.

*: This item is not used.


*: This item is not used.

FREEZE FRAME DATA (FFD)

The BCM records the following vehicle condition at the time a particular DTC is detected, and displays on CONSULT-III.

INT lamp


INT lamp

INT LAMP : CONSULT-III Function (BCM - INT LAMP

)

WORK SUPPORT


*: Factory setting


*: Factory setting

DATA MONITOR

ACTIVE TEST


ACTIVE TEST

Battery saver


Battery saver

BATTERY SAVER : CONSULT-III Function (BCM - BATTERY SAVER)

WORK SUPPORT


*:Factory setting


*:Factory setting

DATA MONITOR

ACTIVE TEST


ACTIVE TEST

*: Each lamp switch is in ON position.


*: Each lamp switch is in ON position.

    Diagnosis system (BCM) (with intelligent key system)
    Common item COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM) APPLICATION ITEM CONSULT-III performs the following functions via CAN communication with BCM. SYSTEM APPLICATION BCM can perfo ...

    Ecu diagnosis information
    BCM With intelligent key WITH INTELLIGENT KEY : List of ECU Reference Without intelligent key WITHOUT INTELLIGENT KEY : List of ECU Reference ...

    Other materials:

    Operation
    Autmatic speed control device (ASCD) : Switch Name and Function SWITCHES AND INDICATORS NOTE: Shared with speed limiter switch. 1. CRUISE indicator lamp 2. SET indicator lamp 3. CANCEL switch 4. Speed limiter MAIN switch 5. ASCD MAIN switch 6. SET / − switch (SET / COAST) 7. ...

    P2263 TC system
    DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.CHECK VACUUM HOSES AND VACUUM GALLERY 1. Turn ignition switch OFF. 2. Check vacuum hoses and vacuum gallery for clogging, cracks or improper connection. Refer to EC-825, "TURBOCHARGER BOOST CONTROL : Vacuum Hose Drawing". Is t ...

    Precaution
    Precautions for Suspension • When installing rubber bushings, the final tightening must be carried out under unladen conditions with tires on ground. Spilled oil might shorten the life of rubber bushings. Be sure to wipe off any spilled oil. - Unladen conditions mean that fuel, engine coolant ...