Nissan Juke Service and Repair Manual : Diagnosis system (BCM) (without intelligent key system)

Description

Air conditioning system performs self-diagnosis, operation check, function diagnosis, and various settings using diagnosis function of each control unit.

Common item : consult-III Function (BCM - COMMON ITEM)


Common item : consult-III Function (BCM - COMMON ITEM)

APPLICATION ITEM

CONSULT-III performs the following functions via CAN communication with BCM.

SYSTEM APPLICATION


SYSTEM APPLICATION

BCM can perform the following functions for each system.

NOTE

:
It can perform the diagnosis modes except the following for all sub system selection items.


• *1: This item is displayed, but is not used.


• *1: This item is displayed, but is not used.

• *2: For models with automatic A/C, this mode is not used.

Air conditioner : consult-III Function (BCM - AIR CONDITIONER) (Manual A/ C 2WD Models)

DATA MONITOR

Display item list

ACTIVE TEST


ACTIVE TEST

ECU diagnosis information


    Diagnosis system (BCM) (with intelligent key system)
    Description Air conditioning system performs self-diagnosis, operation check, function diagnosis, and various settings using diagnosis function of each control unit. Common item : consult-III F ...

    Other materials:

    Diagnosis system (BCM) (with intelligent key system)
    Common item COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM) APPLICATION ITEM CONSULT-III performs the following functions via CAN communication with BCM. SYSTEM APPLICATION BCM can perform the following functions for each system. NOTE: It can perform the diagnosis modes except the ...

    P1745 line pressure control
    Description The line pressure solenoid valve regulates the oil pump discharge pressure to suit the driving condition in response to a signal sent from the TCM. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE NOTE: If “DTC CONFIRMATION PROCEDURE” has been previously performed, alw ...

    Diagnosis system (TCM)
    CONSULT-III Function (TRANSMISSION) CONSULT-III can display each diagnostic item using the diagnostic test modes shown below. FUNCTION *: “Function Test” can be selected, but do not use it. WORK SUPPORT MODE Display Item List Engine Brake Adjustment “ENGINE BRAKE LEVEL” 0: Initial ...