Nissan Juke Service and Repair Manual : Diagnosis system (BCM) (without intelligent key system)

Description

Air conditioning system performs self-diagnosis, operation check, function diagnosis, and various settings using diagnosis function of each control unit.

Common item : consult-III Function (BCM - COMMON ITEM)


Common item : consult-III Function (BCM - COMMON ITEM)

APPLICATION ITEM

CONSULT-III performs the following functions via CAN communication with BCM.

SYSTEM APPLICATION


SYSTEM APPLICATION

BCM can perform the following functions for each system.

NOTE

:
It can perform the diagnosis modes except the following for all sub system selection items.


• *1: This item is displayed, but is not used.


• *1: This item is displayed, but is not used.

• *2: For models with automatic A/C, this mode is not used.

Air conditioner : consult-III Function (BCM - AIR CONDITIONER) (Manual A/ C 4WD Models)

DATA MONITOR

Display item list

ACTIVE TEST


ACTIVE TEST

ECU diagnosis information


    Diagnosis system (BCM) (with intelligent key system)
    Description Air conditioning system performs self-diagnosis, operation check, function diagnosis, and various settings using diagnosis function of each control unit. Common item : consult-III F ...

    ECU diagnosis information
    BCM, ECM, IPDM E/R List of ECU Reference ...

    Other materials:

    System
    Body control system BODY CONTROL SYSTEM : System Description OUTLINE • BCM (Body Control Module) controls various electrical components.It receives the information required from CAN communication and the signals received from each switch and sensor. • BCM has a combination switch reading func ...

    Door mirror system (with intelligent key)
    LHD LHD : Wiring Diagram For connector terminal arrangements, harness layouts, and alphabets in a (option abbreviation; if not described in wiring diagram), refer to GI-12, "Connector Information/Explanation of Option Abbreviation". RHD RHD : Wiring Diagram For connector termina ...

    B2321, B2322 oil level sensor
    Description The oil level sensor detects the level of engine oil, and then transmits the oil level signal to the combination meter. DTC Logic DTC DETECTION LOGIC NOTE: When the following conditions are satisfied, the combination meter reads the resistance value of oil level sensor. Th ...