Nissan Juke Service and Repair Manual : Diagnosis system (BCM) (with intelligent key system)

Nissan Juke Service and Repair Manual / Defogger / System description / Diagnosis system (BCM) (with intelligent key system)

Common item

COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM)

APPLICATION ITEM

CONSULT-III performs the following functions via CAN communication with BCM.

SYSTEM APPLICATION


SYSTEM APPLICATION

BCM can perform the following functions for each system.

NOTE

:
It can perform the diagnosis modes except the following for all sub system selection items.

NOTE:


NOTE

:
• *1: This item is displayed, but not used.

• *2: For models with automatic A/C, this diagnosis mode is not used.

FREEZE FRAME DATA (FFD)

The BCM records the following vehicle condition at the time a particular DTC is detected, and displays on CONSULT-III.

Rear window defogger


Rear window defogger

REAR WINDOW DEFOGGER : CONSULT-III Function (BCM - REAR DEFOGGER)

Data monitor

ACTIVE TEST


ACTIVE TEST

Diagnosis systeM (BCM) (without intelligent key system)


    System
    WITH AUTO A/C WITH AUTO A/C : System Diagram WITH AUTO A/C : System Description OPERATION DESCRIPTION • BCM detects that the rear window defogger switch turns ON when the ignition switch is ON ...

    Diagnosis systeM (BCM) (without intelligent key system)
    Common item COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM) APPLICATION ITEM CONSULT-III performs the following functions via CAN communication with BCM. SYSTEM APPLICATION BCM can perfo ...

    Other materials:

    Can communication
    CAN COMMUNICATION : System Description CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped ...

    Inside key antenna
    Instrument center INSTRUMENT CENTER : Removal and Installation REMOVAL 1. Remove the multi display unit. Refer to AV-125, "Removal and Installation". 2. Remove the inside key antenna (instrument center) (1) mounting clip (A), and then remove inside key antenna (instrument center). ...

    Diagnosis system (multi display unit)
    CONSULT-III Function APPLICATION ITEM CONSULT-III performs the following functions via CAN communication with multi display unit. SELF DIAGNOSTIC RESULT Refer to AV-111, "DTC Index". DATA MONITOR • *1: MR16DDT • *2: This is not used to determine ON/OFF of the indicator lam ...