Nissan Juke Service and Repair Manual : Diagnosis system (BCM)
Common item
COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM)
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE
:
It can perform the diagnosis modes except the following for all sub system
selection items.
• *1: This item is displayed, but is not used.
• *2: For models with automatic A/C, this mode is not used.
Door lock
DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (With Super Lock)
WORK SUPPORT
*: P range interlock door lock/unlock can be selected for M/T models, but automatic door lock/unlock function does not operate.
DATA MONITOR
DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)
WORK SUPPORT
*: P range interlock door lock/unlock can be selected for M/T models, but automatic door lock/unlock function does not operate.
DATA MONITOR
ACTIVE TEST
Rear window defogger
REAR WINDOW DEFOGGER : CONSULT-III Function (BCM - REAR DEFOGGER)
Data monitor
ACTIVE TEST
Buzzer
BUZZER : CONSULT-III Function (BCM - BUZZER)
CONSULT-III APPLICATION ITEMS
DATA MONITOR
ACTIVE TEST
INT lamp
INT LAMP : CONSULT-III Function (BCM - INT LAMP)
WORK SUPPORT
*: Factory setting
DATA MONITOR
ACTIVE TEST
Multi remote ent
MULTI REMOTE ENT : CONSULT-III Function (BCM - MULTI REMOTE ENT) (With Super Lock)
DATA MONITOR
ACTIVE TEST
WORK SUP
MULTI REMOTE ENT : CONSULT-III Function (BCM - MULTI REMOTE ENT) (Without Super Lock)
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
Headlamp
HEADLAMP : CONSULT-III Function (BCM - HEAD LAMP)
WORK SUPPORT
*1: For models is without auto light system, this item is not displayed.
*2: Factory setting
DATA MONITOR
*1: Only models with front fog lamp can be monitored.
*2: Only models with auto light system can be monitored.
ACTIVE TE
*1: For models without front fog lamp, this item is displayed but active test is not operated.
*2: For models without daytime running light system, this item is not displayed.
Wiper
WIPER : CONSULT-III Function (BCM - WIPER)
WORK SUPPORT
*1: The item is indicated, but not operated on model with rain sensor *2: The item is indicated, but not operated on model without rain sensor *3: Factory setting
DATA MONITOR
*: The item is displayed but is not monitored on model without rain sensor
ACTIVE TEST
Flasher
FLASHER : CONSULT-III Function (BCM - FLASHER)
DATA MONITOR
ACTIVE TEST
Air conditioner
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER) (Automatic A/C 4WD Models)
DATA MONITOR
Display Item List
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER) (Automatic A/C 2WD Models)
DATA MONITOR
Display Item List
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER) (Manual A/ C 4WD Models)
DATA MONITOR
Display item list
ACTIVE TEST
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER) (Manual A/ C 2WD Models)
DATA MONITOR
Display item list
ACTIVE TEST
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER) (Heater and Ventilation)
DATA MONITOR
Display item list
Comb SW
COMB SW : CONSULT-III Function (BCM - COMB SW)
DATA MONITOR
BCM
BCM : CONSULT-III Function (BCM - BCM)
WORK SUPPORT
IMMU
IMMU : CONSULT-III Function (BCM - IMMU)
WORK SUPPORT
ACTIVE TEST
Battery saver
BATTERY SAVER : CONSULT-III Function (BCM - BATTERY SAVER)
WORK SUPPORT
*:Factory setting
DATA MONITOR
ACTIVE TEST
*: Each lamp switch is in ON position.
Trunk
TRUNK : CONSULT-III Function (BCM - TRUNK) (With Super Lock)
DATA MONITOR
TRUNK : CONSULT-III Function (BCM - TRUNK) (Without Super Lock)
DATA MONITOR
Theft ALM
THEFT ALM : CONSULT-III Function (BCM - THEFT)
WORK SUPPORT
ACTIVE TEST
Signal buffer
SIGNAL BUFFER : CONSULT-III Function (BCM - SIGNAL BUFFER)
DATA MONITOR
ACTIVE TEST
System
Body control system BODY CONTROL SYSTEM : System Description OUTLINE • BCM (Body Control Module) controls various electrical components.It receives the information required from CAN communicatio ...Ecu diagnosis information
BCM (body control module) Reference Value VALUES ON THE DIAGNOSIS TOOL TERMINAL LAYOUT PHYSICAL VALUES NOTE: • *1: Without automatic A/C • *2: RHD models • *3: ...Other materials:
Main power supply and ground circuit
Diagnosis Procedure
1.CHECK TCM POWER CIRCUIT 1
1. Turn the ignition switch OFF.
2. Disconnect the TCM connector.
3. Check the voltage between the TCM harness connector terminals and ground.
Is the inspection result normal?
YES >> GO TO 2.
NO >> GO TO 4.
2.CHECK TCM POWER C ...
MR16DDT : Removal and Installation
REMOVAL
1. Disconnect the battery cable from the negative terminal. Refer to PG-124,
"Removal and Installation".
2. Drain engine coolant from radiator. Refer to CO-11, "Draining".
3. Remove charge air cooler. Refer to EM-31, "Removal and Installation".
4. Remove C ...
B2098 ignition relay on stuck
Description
The ignition relay integrated in IPDM E/R is operated with ignition switch ON
signal from the ignition switch.
DTC Logic
DTC DETECTION LOGIC
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check DTC in “Self Diagnostic Result” mode of “IPDM E/R” using CONSUL ...