Nissan Juke Service and Repair Manual : Diagnosis system (BCM)
Common item
COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM)
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE
:
It can perform the diagnosis modes except the following for all sub system
selection items.
NOTE
:
• *1: This item is displayed, but not used.
• *2: For models with automatic A/C, this diagnosis mode is not used.
FREEZE FRAME DATA (FFD)
The BCM records the following vehicle condition at the time a particular DTC is detected, and displays on CONSULT-III.
Door lock
DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (With Super Lock
BCM CONSULT-III FUNCTION
CONSULT-III performs the following functions via CAN communication with BCM.
WORK SUPPORT
*: P range interlock door lock can be selected for M/T models, but automatic door lock/unlock function does not operate.
DATA MONITOR
ACTIVE TEST
*: BD UNLK function does not operate.
DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)
BCM CONSULT-III FUNCTION
CONSULT-III performs the following functions via CAN communication with BCM.
WORK SUPPORT
*: P range interlock door lock can be selected for M/T models, but automatic door lock/unlock function does not operate.
DATA MONITOR
ACTIVE TEST
*: BD UNLK function does not operate.
Rear window defogger
REAR WINDOW DEFOGGER : CONSULT-III Function (BCM - REAR DEFOGGER)
Data monitor
ACTIVE TEST
Buzzer
BUZZER : CONSULT-III Function (BCM - BUZZER)
CONSULT-III APPLICATION ITEMS
DATA MONITOR
ACTIVE TEST
INT lamp
INT LAMP : CONSULT-III Function (BCM - INT LAMP)
WORK SUPPORT
*: Factory setting
DATA MONITOR
ACTIVE TEST
Headlamp
HEADLAMP : CONSULT-III Function (BCM - HEAD LAMP)
WORK SUPPORT
*1: For models is without auto light system, this item is displayed but work support is not operated.
*2: Factory setting
DATA MONITOR
*: For models without auto light system, this is not displayed.
ACTIVE TEST
*: For models without daytime running light system, this item is not displayed.
Wiper
WIPER : CONSULT-III Function - WIPER
WORK SUPPORT
*1: The item is indicated, but not operated on model with rain sensor *2: The item is indicated, but not operated on model without rain sensor *3: Factory setting
DATA MONITOR
ACTIVE TEST
Flasher
FLASHER : CONSULT-III Function (BCM - FLASHER)
WORK SUPPORT
*: Factory setting
DATA MONITOR
ACTIVE TEST
Air conditioner
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER) (Automatic A/C 4WD Models)
DATA MONITOR
Display Item List
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER) (Automatic A/C 2WD Models)
DATA MONITOR
Display Item List
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER) (Manual A/ C 4WD Models)
DATA MONITOR
Display item list
ACTIVE TEST
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER) (Manual A/ C 2WD Models)
DATA MONITOR
Display item list
ACTIVE TEST
Intelligent key
INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (With Super Lock)
WORK SUPPORT
SELF-DIAG RESULT
Refer to BCS-67, "DTC Index".
DATA MONITOR
*1: It is displayed but does not operate on CVT models. *2: OFF is displayed when brake pedal is depressed while brake switch power supply is OFF.
ACTIVE TEST
INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (Without Super Lock)
WORK SUPP
SELF-DIAG RESULT
Refer to BCS-67, "DTC Index".
DATA MONITOR
*1: It is displayed but does not operate on CVT models.
*2: OFF is displayed when brake pedal is depressed while brake switch power supply is OFF.
ACTIVE TEST
Comb SW
COMB SW : CONSULT-III Function (BCM - COMB SW)
DATA MONITOR
BCM
BCM : CONSULT-III Function (BCM - BCM)
WORK SUPPORT
IMMU
IMMU : CONSULT-III Function (BCM - IMMU)
WORK SUPPORT
DATA MONITOR
ACTIVE TEST
Battery saver
BATTERY SAVER : CONSULT-III Function (BCM - BATTERY SAVER)
WORK SUPPORT
*:Factory setting
DATA MONITOR
ACTIVE TEST
*: Each lamp switch is in ON position.
Trunk
TRUNK : CONSULT-III Function (BCM - TRUNK) (With Super Lock)
DATA MONITOR
TRUNK : CONSULT-III Function (BCM - TRUNK) (Without Super Lock)
DATA MONITOR
Theft ALM
THEFT ALM : CONSULT-III Function (BCM - THEFT)
WORK SUPPORT
DATA MONITOR
ACTIVE TEST
Signal buffer
SIGNAL BUFFER : CONSULT-III Function (BCM - SIGNAL BUFFER)
DATA MONITOR
ACTIVE TEST
System
Body control system
BODY CONTROL SYSTEM : System Description
OUTLINE
• BCM (Body Control Module) controls the various electrical components. It
inputs the information required to
the control fro ...
Ecu diagnosis information
BCM
Reference Value
VALUES ON THE DIAGNOSIS TOOL
CONSULT-III MONITOR ITEM
TERMINAL LAYOUT
PHYSICAL VALUES
• *1: With manual A/C
• *2: RHD models
...
Other materials:
B1153 curtain air bag module LH
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With CONSULT-III
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III.
Without CONSULT-III
1. Turn ignition switch ON.
2. Check the air bag warning lamp statu ...
Front grille
Exploded View
1. Bumper fascia assembly
2. Front side grille RH
3. Front center grille
4. Emblem
5. Front side grille LH
: Pawl
Removal and Installation
REMOVAL
CAUTION:
When remove front grilles (1) apply protective tape (A) on the
bumper fascia (2) to protect the painted surface fr ...
Rear wiper arm
Exploded View
1. Rear wiper motor
2. Rear wiper blade
3. Rear wiper arm
4. Rear wiper arm cover
5. Rear wiper pivot seal
A : Model for cold areas
: Pawl
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
Removal and Installation
REMOVAL
1. Operate rear wiper to the auto stop position.
2. Remo ...
