Nissan Juke Service and Repair Manual : CVT shift lock system

Wiring diagram

For connector terminal arrangements, harness layouts, and alphabets in a notdescribed(option abbreviation; if
notdescribed in wiring diagram), refer to GI-12, "Connector Information/Explanation of Option Abbreviation".

Basic inspection


    CVT control system
    Wiring diagram For connector terminal arrangements, harness layouts, and alphabets in a (option abbreviation; if notdescribed in wiring diagram), refer to GI-12, "Connector Information/Expl ...

    Other materials:

    Sensor rotor
    Front sensor rotor : Removal and Installatio REMOVAL Replace wheel hub as an assembly when replacing because sensor rotor cannot be disassembled. • MR16DDT: Refer to FAX-11, "Removal and Installation". • HR16DE: Refer to FAX-43, "Removal and Installation". • K9K: Refer t ...

    B260F Engine status
    Description BCM receives the engine status signal from ECM via CAN communication. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B260F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to BCS-83, "DTC Logic". • If DTC B260F is displayed with DTC U ...

    P060B ECM
    DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.INSPECTION START 1. Turn ignition switch ON. 2. Erase DTC. 3. Turn ignition switch OFF and wait for 20 seconds. 4. Turn ignition switch ON and perform the self-diagnosis. Is the DTC P060B displayed again? YES >> GO TO 2. NO &g ...