Removal and installation

...

A/C auto AMP

Removal and Installation REMOVAL 1. Remove audio unit. Refer to AV-38, "Removal and Installation". 2. Remove inside key antenna (instrument center). Refer to DLK-188, "INSTRUMENT C ...

Other materials:

M&A branch line circuit
Diagnosis Procedure 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the combination meter for damage, bend and loose connection (unit side and connector side). Is the inspection result n ...

B2626 OUTSIDE ANTENNA
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Disconnect outside key antenna (driver side) connector. 2. Perform “INTELLIGENT KEY” Self Diagnostic Result. Is outside key antenna DTC detected? YES >> Refer to DLK-236, "Diagnosis ...

Additional service when removing battery negative terminal
Description When the battery negative terminal is disconnected, the initialization is necessary for normal operation of power window system. CAUTION: The following specified operations can not be performed under the non-initialized condition. • Auto-up operation • Anti-pinch function Wo ...