Nissan Juke Owners Manual : Continuously Variable Transmission (CVT)

The ignition lock is designed so that the ignition switch cannot be turned to


The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the shift lever is moved to the P (Park) position.

• When turning the ignition switch to the LOCK position, make sure that the shift lever is in the P (Park) position.

• When removing the key from the ignition switch, make sure that the shift lever is in the P (Park) position.

When the ignition switch cannot be turned to the LOCK position:

1. Move the shift lever to the P (Park) position.

2. Turn the ignition switch slightly in the ON direction.

3. Turn the ignition switch to the LOCK position.

4. Remove the key.

If the ignition switch is turned to the LOCK position, the shift lever cannot be moved from the P (Park) position. The shift lever can be moved if the ignition switch is in the ON position with the foot brake pedal depressed.

There is an OFF position 1 between the LOCK and ACC positions, although it is not marked on the ignition switch.

    Ignition switch (models without Intelligent Key system)
    WARNING Never remove or turn the key to the LOCK position while driving. This may cause the driver to lose control of the vehicle and could result in serious vehicle damage or personal injury. ...

    Manual Transmission (MT)
    The ignition switch includes a device that helps prevent accidental removal of the key while driving. The key can only be removed when the ignition switch is in the LOCK position. To turn the ig ...

    Other materials:

    Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
    NOTE: • Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. • After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. • Always use CONS ...

    Meters and gauges
    1. Tachometer 2. Engine coolant temperature gauge 3. Vehicle information display — Odometer/twin trip odometer — Trip computer — Torque vectoring AWD (AWD model) — Outside air temperature 4. Fuel gauge 5. Speedometer 6. Warning/indicator lights 7. Instrument brightness control ...

    Component parts
    Component Parts Location 1. BCM • With Intelligent Key: Refer to BCS- 6, "BODY CONTROL SYSTEM : Component Parts Location". • Without Intelligent Key: Refer to BCS-96, "BODY CONTROL SYSTEM : Component Parts Location". 2. Magnet clutch 3. Refrigerant pressure sensor 4. A ...