Nissan Juke Service and Repair Manual : Component parts
INTERIOR LIGHTING SYSTEM
INTERIOR LIGHTING SYSTEM : Component Parts Location
1. IPDM E/R
Refer to PCS-5, "Component Parts
Location"
2. BCM
Refer to BCS-6, "BODY CONTROL
SYSTEM : Component Parts Location"
3. Door lock and unlock switch
4. Front door request switch (driver
side)
5. Front door lock assembly (driver
side) ( unlock sensor)
6. Door switch
7. Luggage room lamp
8. Back door switch
9. Light & rain sensor
10. Remote keyless entry receiver
Refer to DLK-21,
"Component Parts Location"
11. Map lamp
12. Push-button ignition switch
13. Key switch
14. Combination meter
INTERIOR LIGHTING SYSTEM : Component Description
System
Interior room lamp control system INTERIOR ROOM LAMP CONTROL SYSTEM : System Diagram INTERIOR ROOM LAMP CONTROL SYSTEM : System Description OUTLINE • Interior room lamps* are controlled by inter ...Other materials:
P1726 throttle control signal
Description
Electric throttle control actuator consists of throttle control motor,
accelerator pedal position sensor, throttle
position sensor etc. The actuator sends a signal to the ECM, and ECM sends the
signal to TCM with CAN
communication.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATI ...
4WD warning lamp does not turn off
Description
4WD warning lamp does not turn OFF several seconds after the engine started.
Diagnosis Procedure
1.PERFORM SELF-DIAGNOSIS
With CONSULT-III
Perform self-diagnosis for “ALL MODE AWD/4WD”.
Is any DTC detected?
YES >> Check the DTC. Refer to DLN-33, "DTC Index".
N ...
U1010 control unit (CAN)
Description
CAN (Controller Area Network) is a serial communication line for real time
application. It is an on-vehicle multiplex
communication line with high data communication speed and excellent malfunction
detection ability.
Many electronic control units are equipped onto a vehicle, and ...