Nissan Juke Service and Repair Manual : Component parts
Component Parts Location
1. Combination meter
2. Key switch
3. BCM
Refer to BCS-96, "BODY CONTROL
SYSTEM : Component Parts Location"
4. Power window main switch
(door lock/unlock switch)
5. Front door switch (driver side)
6. Front door lock assembly (driver
side)
7. Back door lock assembly
8. Air bag diagnosis sensor unit
Refer to SRC-7, "Component Parts
Location"
9. Remote keyless entry receiver
A. View with the glove box assembly removed
Component Description
Power door lock system
System Diagram System Description DOOR LOCK FUNCTION • The door lock and unlock switch (driver side) is build into power window main switch. • Interlocked with the locking operation of door lo ...Other materials:
P060A ECM
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
1.INSPECTION START
1. Turn ignition switch ON.
2. Erase DTC.
3. Turn ignition switch OFF and wait for 20 seconds.
4. Turn ignition switch ON and perform the self-diagnosis.
Is the DTC P060A displayed again?
YES >> GO TO 2.
NO &g ...
B1120 satellite sensor LH
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With CONSULT-III
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III.
Without CONSULT-III
1. Turn ignition switch ON.
2. Check the air bag warning lamp statu ...
C1142 press sensor
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn
ignition switch OFF and
wait at least 10 seconds before conducting the next test.
>> GO TO 2.
2.CHECK DTC DETECTION
With CONSULT ...