Nissan Juke Owners Manual : Cargo cover (if so equipped)
WARNING
• Never put anything on the cargo cover, no matter how small. Any object on it could cause an injury in an accident or sudden stop.
• Do not leave the cargo cover in the vehicle with it disengaged from the holder.
• The child restraint top tether strap may be damaged by contact with the cargo cover or items in the luggage area. Remove the cargo cover from the vehicle or secure it and any luggage. Your child could be seriously injured or killed in a collision if the top tether strap is damaged.
The cargo cover keeps the luggage compartment contents hidden from the outside.
To install the cargo cover:
1. Open the lift gate.
2. Fix the clipA on the lift gate lower garnish.
3. Fix the clipB on the lift gate side garnish.
4. Hook the rope on the clip located on the lift gate side garnish.
To remove the cargo cover:
1. Open the lift gate.
2. Remove the rope from the lift gate side garnish.
3. Remove the clip B from the lift gate side garnish.
4. Remove the clipA from the lift gate lower garnish.
Coat hook
The coat hook is located above the rear side window.
CAUTION
Do not apply a total load of more than 2 kg (4 lb) to the hook. ...
Windows
POWER WINDOWS
WARNING
• Make sure that all passengers have their hands, etc. inside the vehicle
while it is in motion and before closing the windows. Use the window lock switch
to prevent unexpe ...
Other materials:
ECU diagnosis information
IPDM E/R
Reference Value
VALUES ON THE DIAGNOSIS TOOL
TERMINAL LAYOUT
PHYSICAL VALUES
*1: MR16DDT engine models
*2: Except MR16DDT engine models
*3: CVT models
*4: M/T models
*5: With daytime running light system
*6: Without daytime running light system
*7: K9K engine mo ...
Clutch pedal
LHD : Exploded View
1. Clutch pedal
2. Stopper rubber
3. Clip
4. Clutch interlock switch *1
5. Clutch pedal position switch *2
6. Pedal pad
7. Pedal stopper rubber
*1 : With push-button ignition switch system
*2 : With ASCD or with push-button ignition switch system
: N·m (kg-m, ft-l ...
Air conditioner filter
Exploded View
LHD models
1. A/C unit assembly
2. Air conditioner filter
3. Filter cover
Removal and Installation (LHD models)
REMOVAL
1. Remove glove box assembly. Refer to IP-13, "Removal and Installation".
2. Remove filter cover (1), and then remove air conditioner filter (2) ...
