Nissan Juke Service and Repair Manual : Can communication

CAN COMMUNICATION : System Description

CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.

Each control unit transmits/receives data but selectively reads required data only.

Refer to LAN-31, "CAN COMMUNICATION SYSTEM : CAN Communication Signal Chart", about CAN communication for detail.

    NISSAN dynamic control system
    NISSAN dynamic control system : System Diagram CVT models M/T models NISSAN dynamic control system : System Description CVT models System Description TCM transmits a drive mode select sig ...

    Operation
    AUTOMATIC SPEED CONTROL DEVICE (ASCD) AUTOMATIC SPEED CONTROL DEVICE (ASCD) : Switch Name and Function SWITCHES AND INDICATORS 1. CRUISE indicator 2. SET indicator 3. CANCEL switch 4. RES / ...

    Other materials:

    System
    Can communication system CAN COMMUNICATION SYSTEM : System Diagram CAN COMMUNICATION SYSTEM : System Description Description • CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communicatio ...

    Exploded View
    1. Mounting rubber 2. Main muffler 3. Seal bearing 4. Spring 5. Mounting rubber 6. Seal bearing 7. Exhaust front tube 8. Heated oxygen sensor 2 9. Sub muffler 10. Gasket : Always replace after every disassembly. : N·m (kg-m, ft-lb) ...

    Rear window defogger does not operate but both door mirror defoggers operate
    Diagnosis Procedure 1.CHECK REAR WINDOW DEFOGGER Check rear window defogger. Refer to DEF-31, "Component Function Check". Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace the malfunctioning parts. 2.CONFIRM THE OPERATION Confirm the opera ...