Nissan Juke Service and Repair Manual : Body Repair
- Vehicle information
- Precaution
- Preparation
- Removal and installation
- Service data and specifications (SDS)
Removal and installation
POWER WINDOW MAIN SWITCH Removal and Installation REMOVAL 1. Remove power window main switch finisher. Refer to INT-13, "Removal and Installation". 2. Remove power window main switch ( ...Vehicle information
BODY EXTERIOR PAINT COLOR Body Exterior Paint Color FOR 2WD MODELS NOTE: • S: Solid • 2S: Solid + Clear • CS: Color clear solid • M: Metallic • P: 2-Coat pearl • 3P: 3-Coat pearl • FPM: ...Other materials:
Diagnosis system (PTC heater control unit)
CONSULT-III Function
CONSULT-III performs the following functions via CAN communication with PTC
heater control unit.
ECU IDENTIFICATION
Part number of PTC heater control unit can be checked.
SELF-DIAGNOSTIC RESULT
Diagnosis result that is judged by PTC heater control unit. can be checked ...
Eco information
CAUTION
Do not adjust the display controls while driving so that full attention may
given to vehicle operation.
The following ECO INFO mode will appear on the display by pushing the ECO information
button, then turning the selection dial to scroll through the different screens.
While driving, ...
B1011, B1012, B1013, B1014, B1015 diagnosis sensor unit
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With CONSULT-III
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III.
Without CONSULT-III
1. Turn ignition switch ON.
2. Check the air bag warning lamp statu ...