Nissan Juke Service and Repair Manual : BCM

Removal and Installation

CAUTION:
Before replacing BCM, perform “READ CONFIGURATION” to save or print current vehicle specification.

Refer to BCS-80, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Description".

REMOVAL (RHD MODELS)

1. Remove glove box assembly. Refer to IP-13, "Removal and Installation".

2. Remove harness clip.

3. Remove BCM mounting screws.

4. Remove BCM and disconnect the connectors.

5. Remove relays and relay mounting bracket from BCM.

REMOVAL (LHD MODELS)

1. Remove instrument lower panel. Refer to IP-13, "Removal and Installation".

2. Remove harness clip.

3. Remove BCM mounting screws.

4. Remove BCM and disconnect the connectors.

5. Remove relays and relay mounting bracket from BCM.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
• Be sure to perform “WRITE CONFIGURATION” when replacing BCM.

• Be sure to perform the system initialization (NATS) when replacing BCM. Refer to BCS-80, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Special Repair Requirement".

    Combination switch
    Exploded View 1. Combination switch 2. Combination switch connector Removal and Installation REMOVAL 1. Remove steering column cover. Refer to IP-13, "Removal and Installation". 2 ...

    Other materials:

    TCM
    Exploded View 1. Bracket 2. TCM :Vehicle front : N·m (kg-m, in-lb) Removal and Installation NOTE: When replacing TCM and transaxle assembly as a set, replace transaxle assembly first and then replace TCM. Refer to TM-374, "Description". REMOVAL 1. Remove the battery. Refer ...

    P1611 ID discord, IMMU-ECM
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON. 2. Check DTC in “Self Diagnostic Result” mode of “ENGINE” using CONSULT-III. Is DTC detected? YES >> Refer to SEC-193, "Diagnosis Procedure". NO > ...

    P1722 vehicle speed
    Description The vehicle speed signal is transmitted from ABS actuator and electric unit (control unit) to TCM by CAN communication line. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE CAUTION: Always drive vehicle at a safe speed. NOTE: If “DTC CONFIRMATION PROCEDURE” has been ...