Nissan Juke Service and Repair Manual : Basic inspection
- Diagnosis and repair workflow
- Additional service when replacing ECM
- Accelerator pedal released position learning
- Throttle valve closed position learning
- Idle air volume learning
- Mixture ratio self-learning value clear
- Basic inspection
- Fuel pressure check
- How to set SRT code
Wiring diagram
Engine control system
Wiring Diagram
For connector terminal arrangements, harness layouts, and alphabets in a
(option abbreviation; if not
described in wiring diagram), refer to GI-12, "Conn ...
Diagnosis and repair workflow
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
1.GET INFORMATION FOR SYMPTOM
Get the detailed information from the customer about the symptom (the
condition and the environment when
the incident/ma ...
Other materials:
Door mirror defogger
Description
Heats the heating wire with the power supply from the rear window defogger
relay to prevent the door mirror
from fogging up.
Component Function Check
1.CHECK DOOR MIRROR DEFOGGER
1. Perform IPDM E/R Active Test (“REAR DEFOGGER”) using CONSULT-III.
2. Touch “ON”.
3. Check that bo ...
Manual Transmission (MT)
The ignition switch includes a device that helps prevent accidental removal of
the key while driving.
The key can only be removed when the ignition switch is in the LOCK position.
To turn the ignition switch to the LOCK position from the ACC or ON position,
turn the key to the OFF position, ...
Camshaft
Exploded View
1. Camshaft bracket (No. 2 to 5)
2. Camshaft bracket (No. 1)
3. Camshaft sprocket (EXH)
4.Exhaust valve timing control solenoid
valve
5. O-ring
6.Camshaft sprocket (INT)
7. Plug (EXH)
8. Washer (EXH)
9.Oil filter (for exhaust valve timing control
solenoid valve)
10. ...
