Nissan Juke Service and Repair Manual : Basic inspection
Vehicle Recovery (Freeing a Stuck Vehicle)
FRONT 1. Remove the hook cover from the bumper using a remover tool. 2. Securely install the vehicle recovery hook stored with jacking tools. Check that the hook is properly secured in the store ...Service information for electrical incident
Work Flow WORK FLOW Control Units and Electrical Parts PRECAUTIONS • Never reverse polarity of battery terminals. • Install only parts specified for a vehicle. • Before replacing the control ...Other materials:
Heater and air conditioner
WARNING
• The air conditioner cooling function operates only when the engine
is running.
• Do not leave children or adults who would normally require the support of others
alone in your vehicle. Pets should not be left alone either. On hot, sunny days,
temperatures in a closed vehicle ...
4WD mode indicator lamp (4WD)
Component Function Check
1.4WD MODE INDICATOR LAMP OPERATION CHECK
Check that 4WD mode indicator lamp (4WD) turns on for approximately 1 second
after the ignition switch is
turned ON.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Proceed to diagnosis procedure. R ...
Performance test
Inspection
INSPECTION PROCEDURE
1. Connect recovery/recycling/recharging equipment (for HFC-134a) or manifold
gauge.
2. Start the engine, and set to the following condition.
Test condition
3. Maintain test condition until A/C system becomes stable. (Approximately 10
minutes)
4. Check t ...