Wiring diagram

BRAKE CONTROL SYSTEM Wiring Diagram For connector terminal arrangements, harness layout, and alphabets in a (option abbreviation; if not described in wiring diagram), refer to GI-12, "Connec ...

Diagnosis and repair work flow

Work Flow DETAILED FLOW 1.INTERVIEW FROM THE CUSTOMER Clarify customer complaints before inspection. First of all, perform an interview utilizing BRC-146, "Diagnostic Work Sheet" and r ...

Other materials:

Stop lamp switch
Component Function Check 1.CHECK STOP LAMP SWITCH OPERATION Depress brake pedal and check that stop lamp turns ON, or release brake pedal and check stop lamp turns OFF. Is the inspection result normal? YES >> GO TO 2. NO >> Check stop lamp system. Refer to EXL-39, "Wirin ...

Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE: • Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. • After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. • Always use CONS ...

Washing
Wash dirt off the vehicle with a wet sponge and plenty of water. Clean the vehicle thoroughly using a mild soap, a special vehicle soap or general purpose dishwashing liquid mixed with clean, lukewarm (never hot) water. CAUTION • Do not use car washes that use acid in the detergent. Some car w ...