Nissan Juke Service and Repair Manual : Back door lock
Exploded View
1. Back door lock assembly
2. TORX bolt
3. Back door striker
: Do not reuse
: N·m (kg-m, ft-lb)
: Body grease
Door lock
DOOR LOCK : Removal and Installation
REMOVAL
1. Remove the back door lower finisher. Refer to INT-35, "BACK DOOR LOWER FINISHER : Removal and Installation".
2. Remove back door lock assembly mounting bolts.
3. Disconnect back door lock connector, and then remove back door lock assembly.
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
After installation, check back door open/close, and lock/unlock operation.
Emergency lever
EMERGENCY LEVER : Unlock procedures
UNLOCK PROCEDURES
NOTE
:
If back door lock cannot be unlocked due to a malfunction or battery discharge,
follow the procedures to
unlock back door.
1. Remove emergency lid. Refer to INT-36, "EMERGENCY LID : Removal and Installation".
2. From inside the vehicle, rotate emergency lever toward lower direction and unlock.
Rear door lock
Exploded View 1. Outside handle assembly 2. Rear door sealing screen 3. Door lock assembly 4. TORX bolt 5. Inside handle : Clip : Pawl : Vehicle front : Do not reuse : N·m (kg-m, in-lb) ...Fuel filler lid opener
Exploded View 1. Fuel filler lid opener cable 2. Cable protector 3. Fuel filler lid lock assembly 4. Fuel filler lid assembly 5. Spring 6. Bumper rubber : Clip : Do not reuse Fuel fille ...Other materials:
The seat belt reminder warning continues sounding, or
does not sound
Description
• Seat belt reminder warning does not sound.
• Seat belt reminder warning sounds continuously.
Diagnosis Procedure
1.CHECK SEAT BELT WARNING LAMP
1. Turn ignition switch ON.
2. Check the operation of the seat belt warning lamp in the combination meter.
Seat belt (driver side) fast ...
Connector Information/Explanation of Option Abbreviation
CONNECTOR LIST
Connector information and harness layout are described in “POWER SUPPLY,
GROUND & CIRCUIT ELEMENTS”
Section.
EXPLANATION OF OPTION ABBREVIATION
HOW TO USE CONNECTOR INFORMATION
Description
...
Wiring diagram
HEATED SEAT SYSTEM
Wiring Diagram
For connector terminal arrangements, harness layouts, and alphabets in a
(option abbreviation; if not
described in wiring diagram), refer to GI-12, "Connector Information/Explanation
of Option Abbreviation".
...