Nissan Juke Service and Repair Manual : B26F6 BCM

DTC Logic

DTC DETECTION LOGIC

NOTE

:
• If DTC B26F6 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to BCS-83, "DTC Logic".

• If DTC B26F6 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to BCS-84, "DTC Logic".

DTC CONFIRMATION PROCEDURE


DTC CONFIRMATION PROCEDURE

1.PERFORM DTC CONFIRMATION PROCEDURE

1. Turn ignition switch ON under the following conditions, and wait for 1 second or more.

CVT models
- Selector lever is in the P or N position - Do not depress brake pedal

M/T models
- Do not depress clutch pedal

2. Check “Self-diagnosis result” of BCM with CONSULT-III.

Is DTC detected? YES >> Go to PCS-107, "Diagnosis Procedure".

NO >> INSPECTION EN

Diagnosis Procedure

1.INSPECTION START

1. Turn ignition switch ON.

2. Select “Self-diagnosis result” of BCM with CONSULT-III.

3. Touch “ERASE”.

4. Perform DTC Confirmation Procedure.

See PCS-107, "DTC Logic".

Is DTC detected? YES >> Replace BCM. Refer to BCS-93, "Removal and Installation" NO >> INSPECTION END

    B26F2 ignition relay
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON under the following conditions, and wait for 2 seconds or more. CVT ...

    Push-button ignition switch
    Component Function Check 1.CHECK FUNCTION 1. Select “PUSH SW” in “Data Monitor” mode with CONSULT-III. 2. Check the push-button ignition switch signal under the following conditions. Is the indi ...

    Other materials:

    Lubricant
    Description MAINTENANCE OF LUBRICANT LEVEL The compressor lubricant is circulating in the system together with the refrigerant. It is necessary to fill compressor with lubricant when replacing A/C system parts or when a large amount of refrigerant leakage is detected. It is important to alwa ...

    B2578, B2579 In-vehicle sensor
    DTC Logic DTC DETECTION LOGIC NOTE: • If DTC is displayed along with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to HAC- 51, "DTC Logic". • If DTC is displayed along with DTC U1010, first perform the trouble diagnosis for DTC U1010. HAC-52, "DTC Logic ...

    Meters and gauges
    1. Tachometer 2. Engine coolant temperature gauge 3. Vehicle information display — Odometer/twin trip odometer — Trip computer — Torque vectoring AWD (AWD model) — Outside air temperature 4. Fuel gauge 5. Speedometer 6. Warning/indicator lights 7. Instrument brightness control ...