Nissan Juke Owners Manual : Aluminum alloy wheels
Wash regularly with a sponge dampened in a mild soap solution, especially during winter months in areas where road salt is used. Salt could discolor the wheels if not removed.
CAUTION
Follow the directions below to avoid staining or discoloring the wheels:
• Do not use a cleaner that uses strong acid or alkali contents to clean the wheels.
• Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as ambient temperature.
• Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied.
Wheels
Wash the wheels when washing the vehicle to maintain their appearance. • Clean the inner side of the wheels when the wheel is changed or the underside of the vehicle is washed. • Inspect wheel rim ...Chrome parts
Clean chrome parts regularly with a nonabrasive chrome polish to maintain the finish. ...Other materials:
B2191 difference of key
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check DTC in “Self Diagnostic Result” mode of “BCM” using CONSULT-III.
Is DTC detected?
YES >> Refer to SEC-203, "Diagnosis Procedure".
NO >&g ...
Engine oil and oil filter recommendation
1. API certification mark
2. API service symbol
Selecting the correct oil
It is essential to choose the correct grade, quality, and viscosity engine oil
to ensure satisfactory engine life and performance, see “Capacities and recommended
fuel/lubricants” . NISSAN recommends the use of an ene ...
Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE:
• Before removing and installing any control units, first turn the ignition
switch to the LOCK position, then disconnect
both battery cables.
• After finishing work, confirm that all control unit connectors are connected
properly, then re-connect both
battery cables.
• Always use CONS ...