Nissan Juke Owners Manual : All-Wheel Drive (AWD) (if so equipped)

WARNING

•  For AWD equipped vehicles, do not attempt to raise two wheels off the ground and shift the transmission to any drive or reverse position with the engine running. Doing so may result in drivetrain damage or unexpected vehicle movement which could result in serious vehicle damage or personal injury.

• Do not attempt to test an AWD equipped vehicle on a 2-wheel dynamometer (such as the dynamometers used by some states for emissions testing) or similar equipment even if the other two wheels are raised off the ground. Make sure that you inform the test facility personnel that your vehicle is equipped with AWD before it is placed on a dynamometer. Using the wrong test equipment may result in drivetrain damage or unexpected vehicle movement which could result in serious vehicle damage or personal injury.

Increasing fuel economy
• Keep your engine tuned up. • Follow the recommended scheduled maintenance. • Keep the tires inflated to the correct pressure. Low tire pressure increases tire wear and lowers fuel economy. • Ke ...

All-Wheel Drive (AWD) mode switch operations
AWD mode switch The All-Wheel Drive (AWD) system is used to select the 2WD (Two-Wheel Drive), AWD-V or AWD mode depending on the driving conditions. The AWD mode indicator lights ( (green), ) a ...

Other materials:

Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW Work Flow OVERALL SEQUENCE DETAILED FLOW 1.INTERVIEW FOR MALFUNCTION Interview the symptom to the customer. >> GO TO 2. 2.SYMPTOM CHECK Check the symptom from the customer's information. >> GO TO 3. 3.BASIC INSPECTION Check the operation o ...

System
Starting system (with intelligent key) : System Diagram *1: M/T models *2: CVT models Starting system (with intelligent key) : System Description CVT MODELS • When selector lever is P or N, power is supplied to starter relay and starter control relay by transmission range switch. And BCM a ...

Electric controlled coupling oil seal
Exploded View 1. Rear final drive assembly 2. Electric controlled coupling oil seal A. Oil seal lip : Vehicle front : Always replace after every disassembly. : Apply multi purpose grease : Apply gear oil. Removal and Installation REMOVAL 1. Remove rear drive shafts. Refer to RAX-17, & ...