Nissan Juke Service and Repair Manual : ACC warning does not operate

Diagnosis Procedure

1.CHECK COMBINATION METER BUZZER

Check combination meter buzzer.

Refer to WCS-40, "Component Function Check".

Is the inspection result normal? YES >> GO TO 2.

NO >> Repair or replace the malfunctioning parts.

2.REPLACE BCM

1. Replace BCM. Refer to BCS-93, "Removal and Installation".

2. Confirm the operation after replacement.

Is the result normal? YES >> INSPECTION END

NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

    P position warning does not operate
    Diagnosis Procedure 1.CHECK DTC WITH BCM, TCM AND COMBINATION METER Check that DTC is not detected with BCM, TCM and combination meter. Is the inspection result normal? YES >> GO TO 2. ...

    Take away warning does not operate
    Diagnosis Procedure 1.CHECK DTC WITH BCM AND COMBINATION METER Check that DTC is not detected with BCM and combination meter. Is the inspection result normal? YES >> GO TO 2. NO-1 >& ...

    Other materials:

    B209f cranking request circuit
    DTC Logic DTC DETECTION LOGIC NOTE: If DTC B209F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to PCS- 59, "DTC Logic". DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Perform DTC CONFIRMATION PROCEDURE for DTC P1650. Re ...

    Floor trim
    Exploded View LHD models 1. Floor carpet 2. Carpet hook 3. Trim clip 4. Column hole cover 5. Harness clip 6. Front floor spacer RH 7. Front floor spacer LH 8. Rear floor spacer LH 9. Rear floor spacer RH : Clip : Pawl Removal and Installation REMOVAL CAUTION: • When removing ...

    Compressor dose dot operate
    Description SYMPTOM Compressor dose not operate. Diagnosis Procedure NOTE: • Perform self-diagnosis with CONSULT-III before performing symptom diagnosis. If any malfunction result or DTC is detected, perform the corresponding diagnosis. • Check that refrigerant is enclosed in cooler cycle n ...