Nissan Juke Service and Repair Manual : A/C auto AMP. Connection recognition signal circuit

Nissan Juke Service and Repair Manual / Meter, Warning Lamp & Indicator / DTC/circuit diagnosis / A/C auto AMP. Connection recognition signal circuit

Diagnosis Procedure

1.CHECK A/C AUTO AMP. CONNECTION RECOGNITION SIGNAL

1. Turn ignition switch ON.

2. Check voltage between combination meter harness connector and ground.

Is the inspection result normal?


Is the inspection result normal? YES >> INSPECTION END

NO >> GO TO 2.

2.CHECK A/C AUTO AMP. CONNECTION RECOGNITION SIGNAL CIRCUIT

1. Turn ignition switch OFF.

2. Disconnect combination meter connector and A/C auto amp. connector.

3. Check continuity between combination meter harness connector and A/C auto amp. harness connector.

*1: 4WD models


*1: 4WD models
*2: 2WD models

4. Check continuity between combination meter harness connector and ground.

Is the inspection result normal?


Is the inspection result normal? YES >> INSPECTION END

NO >> Repair harness or connector.

    Seat belt buckle switch signal circuit (passenger side)
    Diagnosis Procedure 1.CHECK SEAT BELT BUCKLE SWITCH (PASSENGER SIDE) CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect combination meter connector and seat belt buckle switch (passenger side) co ...

    PTC heater control unit connection recognition signal circuit
    Diagnosis Procedure 1.CHECK PTC HEATER CONTROL UNIT CONNECTION RECOGNITION SIGNAL 1. Turn ignition switch ON. 2. Check voltage between combination meter harness connector and ground. Is the insp ...

    Other materials:

    U1000 can comm circuit
    Description CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern vehicle is equipped with many electronic control unit, and eac ...

    Keyfob battery
    Component Function Check 1.CHECK FUNCTION Check door lock and unlock operation with keyfob button. Is the inspection result normal? YES >> Keyfob is OK. NO >> Refer to DLK-403, "Diagnosis Procedure". Diagnosis Procedure 1.CHECK KEYFOB BATTERY Check by connecting a r ...

    Component parts
    Component Parts Location 1. Back door lock assembly 2. Front door lock assembly (driver side) 3. Front door switch (driver side) 4. Power window main switch (door lock/unlock switch) 5. Key switch 6. Combination meter 7. Door lock status indicator 8. Remote keyless entry receiver 9. ...