Nissan Juke Service and Repair Manual : Service data and specifications (SDS)

Air Conditioner Filter

Heater & Air Conditioning System HR16DE


    Other materials:

    Assembly and Installation
    Use torque wrench to tighten bolts or nuts to specification. When tightening nuts and bolts, as a basic rule, equally tighten in several different steps starting with the ones in center, then ones on inside and outside diagonally in this order. If the order of tightening is specified, do ...

    General Precautions
    Always use a 12 volt battery as power source. Do not attempt to disconnect battery cables while engine is running. Before connecting or disconnecting the ECM harness connector, turn ignition switch OFF, wait 3 minutes and disconnect battery negative cable. Failure to do so may damage the ...

    Installing front license plate
    Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag.   License plate bracket   J-nut  2   Screw  2 Screw grommet  2 1. Park the vehicle on flat, level g ...