Nissan Juke Service and Repair Manual : Precaution

Removal and Installation
CAUTION: Be sure to use genuine exhaust system parts or equivalents which are specially designed for heat resistance, corrosion resistance, and shape. Perform the operation with the exhaust s ...

Other materials:

Fusible link inspection
How To Check A melted fusible link can be detected either by visual inspection or by feeling with finger tip. If its condition is questionable, use circuit tester or test lamp. 1 :Fusible link CAUTION: If fusible link should melt, it is possible that critical circuit (power supply or large ...

C1606 EPS motor
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC CONFIRMATION PROCEDURE has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.DTC REPRODUCTION PROCEDURE With ...

Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE: Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. Always use CONS ...