Nissan Juke Service and Repair Manual : Periodical Maintenance Specification

ENGINE COOLANT CAPACITY (APPROXIMATE)

Radiator


    Radiator
    ...

    Other materials:

    Drive belt idler pulley
    Removal and Installation REMOVAL 1. Remove drive belt. Refer to EM-155, "Removal and Installation". 2. Remove the lock nut, and then remove the plate (7), idler pulley (6), and washer (5). 1 : Alternator bracket 3. Remove the center shaft (2) together with the spacer (3) with insert ...

    B2195 anti-scanning
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON. 2. Check DTC in Self Diagnostic Result mode of BCM using CONSULT-III. Is DTC detected? YES >> Refer to SEC-62, "Diagnosis Procedure". NO >> ...

    P0402 EGR volume control valve
    DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.CHECK GROUND CONNECTIONS 1. Turn ignition switch OFF. 2. Check ground connection E38. Refer to Ground inspection in GI-44, "Circuit Inspection". Is the inspection result normal? YES >> GO TO 2. NO >> Repair or ...