Nissan Juke Service and Repair Manual : P0574 VSS

DTC Logic

DTC DETECTION LOGIC

P0575 ASCD steering switch


    P0564 ASCD steering switch
    DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.CHECK ASCD STEERING SWITCH CIRCUIT 1. Check ASCD steering switch circuit. ASCD steering switch>>Refer to EC-1011, "Component Fun ...

    P0575 ASCD steering switch
    DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.CHECK ASCD STEERING SWITCH CIRCUIT 1. Check ASCD steering switch circuit. ASCD steering switch>>Refer to EC-1011, "Component Fun ...

    Other materials:

    Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
    NOTE: Х Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. Х After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. Х Always use CONS ...

    P0340 CMP sensor (PHASE)
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test. 1. Turn ignition switch OFF and wait at least 10 seconds. 2. Turn ignition swit ...

    No or very little acceleration, increase in engine speed
    Description CHART 8: NO OR VERY LITTLE ACCELERATION, INCREASE IN ENGINE SPEED Diagnosis Procedure 1.CHECK FUEL Check that the fuel reservoir is correctly filled and with the right fuel. >> GO TO 2. 2.CHECK ECM POWER SUPPLY AND GROUND CIRCUIT Check ECM power supply and ground circuit ...