Nissan Juke Service and Repair Manual : Noise

Symptom Table

Removal and installation


    Other materials:

    Checking bulbs
    With all doors closed, apply the parking brake and place the ignition switch in the ON position without starting the engine. The following lights will come on: , or , , , , , The following lights come on briefly and then go off (if so equipped): , or , , , , , , , , , If ...

    Power supply and ground circuit
    Diagnosis Procedure 1.CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) IGNITION POWER SUPPLY 1. Turn the ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) harness connector. 3. Check voltage between ABS actuator and electric unit (control unit) harness conne ...

    Unit removal and installation
    Transaxle assembly MR16DDT : Exploded View 1. Transaxle assembly : Refer to "INSTALLATION" in TM-84, "MR16DDT : Removal and Installation" for the locations and tightening torque. MR16DDT : Removal and Installation CAUTION: Never reuse CSC (Concentric Slave Cylinder). ...