Nissan Juke Service and Repair Manual : General Specification

Drive Gear Runout


    Other materials:

    Assembly and Installation
    Х Use torque wrench to tighten bolts or nuts to specification. Х When tightening nuts and bolts, as a basic rule, equally tighten in several different steps starting with the ones in center, then ones on inside and outside diagonally in this order. If the order of tightening is specified, do ...

    Tire Pressure Monitoring System (TPMS)
    Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on th ...

    Thermo control amplifier
    Removal and Installation REMOVAL 1. Remove evaporator. Refer to HA-115, "EVAPORATOR : Removal and Installation". 2. Remove thermo control amp. from evaporator. INSTALLATION Note the following items, and then install in the reverse order of removal. CAUTION: Х Replace O-ring wi ...