Nissan Juke Service and Repair Manual : Ecu diagnosis information

BCM

With intelligent key

WITH INTELLIGENT KEY : List of ECU Reference

Without intelligent key


Without intelligent key

WITHOUT INTELLIGENT KEY : List of ECU Reference

Wiring diagram


    Other materials:

    Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
    NOTE: Х Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. Х After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. Х Always use CONS ...

    Performance test
    Inspection INSPECTION PROCEDURE 1. Connect recovery/recycling/recharging equipment (for HFC-134a) or manifold gauge. 2. Start the engine, and set to the following condition. Test condition 3. Maintain test condition until A/C system becomes stable. (Approximately 10 minutes) 4. Check t ...

    Symptom diagnosis
    Noise, vibration and harshness (NVH) Troubleshooting NVH troubleshooting Chart 1. Locate the area where noise occurs. 2. Confirm the type of noise. 3. Specify the operating condition of engine. 4. Check specified noise source. If necessary, repair or replace these parts. A: Closely rel ...